Ignoring N/A Values in a Sum

Chris has a series of worksheets in a workbook, one for each month of the year. On a summary worksheet he wants to sum the values in the same cell on each worksheet. Chris does this by using a formula similar to the following:

=SUM(January:December!B19)

This works fine, except for those instances where one of the B19 cells in the range may contain the value #N/A. In that case, Chris gets #N/A in the result on the summary sheet, as well. What Chris would like is to have the #N/A results ignored for the sum, as if the cells were blank.

There are a couple of ways to approach this problem. Perhaps the best method is to look at the formula used in cell B19 of each month's worksheet. For instance, let's say that the formula on each worksheet looked like this:

=SUM(B1:B18)

You could change the formulas on these individual worksheets so that they took the possibility of #N/A values into account. For instance, the following would work just fine at B19 on each worksheet:

=SUMIF(B1: B18,"<>#N/A")

This causes the sum in cell B19, on each worksheet, to be based on all the non-N/A values in the range. Because of this, you might think you could do this on the summary sheet:

=SUMIF(January:December!B19,"<>#N/A")

This won't work, however, because the SUMIF function is not "three-dimensional" in nature; it cannot be used on a range of worksheets in the manner shown. It is for this reason that the best solution is to go back to the individual values, on each worksheet, that are being tallied on the summary worksheet.

If your formula on the individual month worksheets don't use the SUM function, it is obviously not as easy to change them to use SUMIF. In that case, you may want to "enclose" the existing formula in a check to see if the formula returns an error value. This technique is done this way:

=IFERROR(<current_B19_formula>,0)

The IFERROR function simply checks to see if there is an error returned by the formula. If there is, then it returns 0; if there isn't, then it returns the result of the formula.

There is a big difference between the IFERROR approach and using the SUMIF approach mentioned earlier. The SUMIF approach returns a sum for all non-N/A values in the range, but the IFERROR approach returns a 0 for the entire sum if there are any #N/A values in the range. This can obviously affect what shows up on your summary sheet, so you will need to determine which approach is best suited to the data you are working with.

ExcelTips is your source for cost-effective Microsoft Excel training. This tip (10233) applies to Microsoft Excel 2007, 2010, 2013, 2016, 2019, and Excel in Microsoft 365. You can find a version of this tip for the older menu interface of Excel here: Ignoring N/A Values in a Sum.