Please Note: This article is written for users of the following Microsoft Excel versions: 2007, 2010, 2013, 2016, 2019, and 2021. If you are using an earlier version (Excel 2003 or earlier), this tip may not work for you. For a version of this tip written specifically for earlier versions of Excel, click here: Updating Links.

Updating Links

Written by Allen Wyatt (last updated April 26, 2022)
This tip applies to Excel 2007, 2010, 2013, 2016, 2019, and 2021


6

Normally, if you have linked information in your workbook, the information is updated whenever you open the workbook. There may be times when you need to update the links manually, however. You do this by following these steps:

  1. Display the Data tab of the ribbon.
  2. In the Connections group, click the Edit Links tool. Excel displays the Edit Links dialog box(Excel 2007, Excel 2010, and Excel 2013). If you are using Excel 2016 or a later version, the Edit Links tool is found in the Queries & Connections group. (See Figure 1.)
  3. Figure 1. The Edit Links dialog box.

  4. Select the link you want to update.
  5. Click on Update Values.
  6. Repeat steps 3 and 4 for any other links you want to update.
  7. Click on Close.

ExcelTips is your source for cost-effective Microsoft Excel training. This tip (7556) applies to Microsoft Excel 2007, 2010, 2013, 2016, 2019, and 2021. You can find a version of this tip for the older menu interface of Excel here: Updating Links.

Author Bio

Allen Wyatt

With more than 50 non-fiction books and numerous magazine articles to his credit, Allen Wyatt is an internationally recognized author. He is president of Sharon Parq Associates, a computer and publishing services company. ...

MORE FROM ALLEN

Word Count for a Section

Dynamic word counts for your entire document are easy to get when you use using fields. There is no built-in method to ...

Discover More

Deleting Datasheet Rows or Columns

How to remove information from your datasheet.

Discover More

Last Non-Zero Value in a Row

If you have a lot of values in a single row, you might want to pull the last non-zero value from that row. There are a ...

Discover More

Create Custom Apps with VBA! Discover how to extend the capabilities of Office 2013 (Word, Excel, PowerPoint, Outlook, and Access) with VBA programming, using it for writing macros, automating Office applications, and creating custom applications. Check out Mastering VBA for Office 2013 today!

More ExcelTips (ribbon)

Pulling Access Information into Excel

If you have a lot of data stored in Access databases, you may want to get at that information using Excel. There are a ...

Discover More

Finding Wayward Links

Combining workbooks that have cross-links to each other can offer some special challenges. This tip examines how you can ...

Discover More

Editing a Hyperlink

Excel will cheerfully keep track of all sorts of hyperlinks for you. If you want to change the hyperlink in some way, ...

Discover More
Subscribe

FREE SERVICE: Get tips like this every week in ExcelTips, a free productivity newsletter. Enter your address and click "Subscribe."

View most recent newsletter.

Comments

If you would like to add an image to your comment (not an avatar, but an image to help in making the point of your comment), include the characters [{fig}] (all 7 characters, in the sequence shown) in your comment text. You’ll be prompted to upload your image when you submit the comment. Maximum image size is 6Mpixels. Images larger than 600px wide or 1000px tall will be reduced. Up to three images may be included in a comment. All images are subject to review. Commenting privileges may be curtailed if inappropriate images are posted.

What is 7 - 7?

2023-09-08 21:51:49

Cal

Regarding " If you are using Excel 2016 or a later version, the Edit Links tool is found in the Queries & Connections group. (See Figure 1.)" Is Figure 1 really for "Excel 2016 or a later version"? Because I have Excel version 2308 and Workbooks "Links tool is found in the Queries & Connections group." Upon clicking "Workbooks Links", I do not see where "Check Status" is or where status is shown.

Also why does "This workbook contains links to one or more external sources that could be unsafe" message pop-up when all the links are listed in Trusted Locations?

Thank you!
(see Figure 1 below)

Figure 1. 


2021-03-28 10:47:58

J. Woolley

You might be interested in the freely available ListExLinks array function in My Excel Toolbox. The result of ListExLinks is similar to the Edit Links dialog minus the Update column (see the Tip), but ListExLinks adds a Reference column. The Reference column identifies cells that contain a formula referencing the link.
See https://sites.google.com/view/MyExcelToolbox/


2021-03-27 13:03:28

Roy

@Dan Simhony:

Well, what you describe is precisely how one does use linking. One expects each spreadsheet will open and update its linked material.

However, one does have to have the source spreadsheet open already. So if spreadsheet A is a spreadsheet compiling information from spreadsheets B and C, B and C must already be open for it to do so. This seems the likeliest problem for your experience.

Naturally, if B or C contain links to A in addition to A's links to them, you have an unresolvable situation, it would seem. You can actually work through simple versions of this by opening B and C, say, "continuing" rather than editing links, opening A whose links to B and C are then updated, closing B and C, then re-opening them so their links to A are updated. But... no editing in between steps. Just opening and closing until the links are all updated. Then one can safely work. Ignore the editing of links opportunities when the dialog boxes come up, just open and close as above until set.


2019-08-18 08:03:29

Dan Simhony

Dear Allen,

I have links in my (destination) workbook to other workbooks (sources) on the very same desktop. I want the destination workbook to be automatically updated each time I open the destination workbook. Why do I keep getting this Edit Links dialog box? How do I get rid of it?

I will be much obliged for your opinion about it as the Internet is full of complaints without any solution.

Sincerely,

Dan Simhony


2018-10-20 14:07:48

MW

For Hot Keys/Shortcut to quickly get to the same Edit box:

Type Alt + A + K

To update all your links: Type Alt + A + K + U


2018-10-20 07:31:08

Col Delane

If the linked workbooks (precedent and dependent) are both open, and Calculation mode is set to either Semi-automatic or Automatic, the dependent workbook will be updated automatically whenever any change occurs in the precedent workbook - no manual intervention required.


This Site

Got a version of Excel that uses the ribbon interface (Excel 2007 or later)? This site is for you! If you use an earlier version of Excel, visit our ExcelTips site focusing on the menu interface.

Newest Tips
Subscribe

FREE SERVICE: Get tips like this every week in ExcelTips, a free productivity newsletter. Enter your address and click "Subscribe."

(Your e-mail address is not shared with anyone, ever.)

View the most recent newsletter.